Precast concrete boundary wall machine
Introduction of concrete boundary wall machine
Pre-stressed Precast concrete Hollow core Boundary wall or Compound wall & Supporting ‘H’ column are made by concrete boundary wall machine includes Concrete extrusion or pushing machine & reinforced with Carbon steel wires, which work without the need of any Mould or Formwork for production. There are two types of hollow-core concrete Boundary Wall Panels & it’s Supporting the ‘H’ Column made by our concrete compound wall machine：
- Light-duty Boundary wall panel with suitable Supporting ‘H’ Column Size – Thickness 50 mm x 300 mm Width X 2 lane cast at a time per casting bed & Length can be cut as per requirement. Normally 2.1 meters are easy to lift by 2 persons while installation. Supporting ‘H’ Column Size 150 x 150mm with through & through Hole in the center for inserting, holding & fixing M. S. Angle for further extension of height with Barbed wires. Lightweight Boundary wall panel machine also available in the following
Boundary wall machine Specifications and dimensions
Heavy-duty Boundary wall panel with suitable Supporting ‘H’ Column Size – Thickness of 50, 65, 75, 80, 90, 100 & 120mm & Width can be 500mm to 600mm & Length can be cut as per requirement. For installation, you need lifting equipment as being heavy. Supporting ‘H’ Column for Heavy Duty: –(A) Supporting H’ Column Size 180 X 200 mm with interchangeable inserts to suit the thickness of panels of 50 / 65 / 75 / 80mm,(B) Supporting H’ Column Size 180 X 230mm with interchangeable inserts to suit the thickness of panels of 90 / 100 / 120 mm thick with through & through Hole in the center for inserting, holding & fixing M.S. Angle for further extension of height with Barbed wires.
Lightweight wall panel production line:
Concrete panel production plant consisting of forklift, raw material silo, mixer, wire tensioning machine, electric material transporter, concrete wall panel machine, panel lifting machine, wall panel installation machine and other equipmentetc.
The wall panels produced are widely used in: boundary wall construction, family farm wall construction, factory wall construction and other fields.
The extruder can produce 1.5-3.0 meter wall panel per minute.
The H posts are used for supporting the wall panels in the structure of concrete boundary wall machine.The size of H post depned on what size of wall panel it need to support. In generally, the commonize of H post is 150*150,200*200,200*180,230*180mm etc.
The wall panels are the main structure of the wall. The panel can be cast by the concrete boundary wall machine like the above photo. It is also cast by the wall panel extruder machine. The wall panels made by wall extruder is with good finish and more compact in their internal.
Other Supporting machines for making Concrete fence wall
